I need vacuum tubing for my 265 vacuum pump View answer
Asked 12 ´months ago | USA Lab Silicone Vacuum Hose - 10FT
I am interested in finding a lab scale recirculating heater/chiller for use in controlling the temp of a jacketed 10 liter reactor. I need the control system to allow me to initially heat the reactor to approx 120 deg F to initiate the reaction, and then to maintain the 120 deg F while the mildly exothermic reaction proceeds. So it should effectively need to provide cooling after the initial heating phase. Is this unit suitable for this purpose? Thanks View answer
Asked 1 ´year ago | Chiller/Heater Combos > USA Lab -40°C to 200°C 6L Heater Chiller UHC-10/40 - For 10L Reactors
What is the size of the unit? Is it 48"x40"x40" as it is mentioned in the top of the page or 19"x14"x29"as it is stated on Description tab?What is the flow rate at zero pressure and at 2.2bar? View answer
Asked 1 ´year ago | USA Lab 110V 5L -10°C to 99°C Magnetic Recirculating Heater Chiller HC-5/10
Hello,I have an additional questions to the equipment USA Lab -40°C to 200°C 6L Heater Chiller UHC-10/40 . What specific fluid is circulating in the chiller system? Is the reservoir already filled with this fluid after purchasing? Is any detailed spec/data sheet for this heater chiller which you can share? Best RegardsIwona Herbik View answer
Asked 2 ´years ago | Chiller/Heater Combos > USA Lab -40°C to 200°C 6L Heater Chiller UHC-10/40 - For 10L Reactors
Good AfternoonI have two questions for the USA Lab -40°C to 200°C 6L Heater Chiller UHC-10/4 equipment:1. Is that chiller appropriate to connect with some kind of heat exchanger in close loop (e. g. cold plate), to maintain temperature of this cold plate at -40 °C (when stored in some kind of uninsulated box). 2. Is the refrigerating wattage equal to 1.9kW also at -40 °C level? I would like to maintain the surface of cold plate (which is connected to the chiller) at -40 °C, while on this cold plate lies the sample which generate heat about 450 W.Best RegardsIwona Herbik View answer
Asked 2 ´years ago | Chiller/Heater Combos > USA Lab -40°C to 200°C 6L Heater Chiller UHC-10/40 - For 10L Reactors
Does the recirculation pump drive flow through the outlet for use with external setups? I also see that the cooling range is listed at 10-38C. Can this be used to cool externally heated test fixtures (that would otherwise be higher temp) down to the 40-60C range? Thank you. View answer
Asked 2 ´years ago | USA Lab 110V 5L -10°C to 99°C Magnetic Recirculating Heater Chiller HC-5/10
