Question 1

How much does this recover per Hour? View answer

Answer posted 2 years ago | USA Lab 6" Falling Film Evaporator - 60l/hr

Question 2

Hello USA LAB,I am interested in using the Stainless Steel 10" Condensing Coil Bucket- SS304 for our research lab. Beside the pictures on websit, Could you please share a couple of pictures of it taken from inside? I want to see the bottom of the coil. and how each of the ports connected to the wall. Thank you!

Asked 2 ´years ago | Coils > Stainless Steel 10" Condensing Coil Bucket- SS304- Various sizes- 1/2" , 1/4"

Question 3

Min and Max Temps?Can it handle -60C

Asked 2 ´years ago | 3/8" FNPT High Pressure 2 Way Ball Valve Stainless Steel 304 - 1,000psi

Question 4

Can I connect two pumps to one cold trap? And also, what is difference between with/without KF25?

Asked 2 ´years ago | Cold Traps > USA Lab UL Listed Mechanical Cold Trap Bath -40ºC or -80ºC / KF25 or Glass Insert

Question 5

I would like quotes for (1) and (3) USA Lab UL Listed Mechanical Cold Trap Bath -40ÂºC / KF25. Please also provide lead times. Thanks!

Asked 2 ´years ago | Cold Traps > USA Lab UL Listed Mechanical Cold Trap Bath -40ºC or -80ºC / KF25 or Glass Insert

Question 6

Hi, can I know a bit more about its BET surface area and pore volume? Thanks.

Asked 2 ´years ago | Carbon Chemistry Activated Alumina - 1.5KG, 7KG, 14KG & 120KG

Question 7

Can I purchase this without the 6" tri-clamp lid?

Asked 2 ´years ago | USA Lab 50L 6" Tri-Clamp Sanitary Keg w/ Dip Tube

Question 8

Hi, I am interested in knowing a little bit more information about this Jacketed material column spool. I am looking at the 12" diameter and 24" long jacket that comes with 2 x 1/2" FNPT fittings. The fluid flow path I am assuming is just a concentric cylinder inside the jacket, is that right? If yes, What are the fluid flow diameters inside the jacket? I need to do some heat transfer calculations to make it's suitable for our purposes.Appreciate the additional information in advance.Regards,Sandeep

Asked 2 ´years ago | Jacketed Material Column Spool - 12" x 24" Tri Clamp w/ (2) 1/2" FNPT - SS304

Question 9

When will this be back in stock

Asked 2 ´years ago | USA Lab 3" Tri-Clamp Variable Speed Electric Mount Mixer - Mixing Motor - 1000RPM - 90PSI

Question 10

What are the dimensions of this scoop?

Asked 2 ´years ago | USA Lab Stainless Steel Dry Ice Scooper

Question 11

Please can I get a quote for USA Lab -40Â°C to 200Â°C 12L Heater Chiller UHC-50/40 - Floor Model. I want to purchase it through my University business account which requires me to have a quote for that. Thank you.

Asked 2 ´years ago

Question 12

Is this product Organic certified?

Asked 2 ´years ago | USA Lab 200 Proof Ethanol USP 99.97% - Excise Tax Included

Question 13

USA Lab 24/40 250mL Short Path Distillation Single Cow Receiver Adapter - 135Â°..qty. 2

Asked 2 ´years ago | USA Lab 24/40 250mL Short Path Distillation Single Cow Receiver Adapter - 135°

Question 14

xxxx all that xxxx you posted, missed me with that xxxx ...Misconceptions my assYour a fraud company selling China crap masked as USA made products...I don't mind buying China stuff like I said I could of purchased a 600$ rotovap with the same quality and warranty as you claim, the problem is you disguise your products as usa made so I spend $1600 on your non usa made rotovap So give me a Hugh discount or take your crap back so I can go purchased another China made unit for half the price And at your expense not mine, you lied to me and sold me a non usa made product

Asked 2 ´years ago | USA Lab Equipment 110V 2L Rotary Evaporator Rotovap RE-200A - 1 Year Warranty

Question 15

Why don't you guys tell customers straight up that these are china products? I paid 1k$ extra thinking this was a usa quality product, I could of bought this for 600$ on Amazon with the same warranty, I definitely deserve credit for my purchase, and didn't even get free shipping on an order over 1500$. Lame

Asked 2 ´years ago | USA Lab Equipment 110V 2L Rotary Evaporator Rotovap RE-200A - 1 Year Warranty

Question 16

Hello my name is Luca De Angelis and I am the lab manager from Dr. Doyle's lab. We are looking for rotary vapor and we are interested in USA Lab Equipment 110V 2L Rotary Evaporator Rotovap RE-200A - 1 Year Warranty. I noticed that this rotavaport is not coming with the vacuum pump. How much will the price be with the pump? Can I use apump from another vendor for example buchi? Is it compatible? and how soon can you ship the rotavaport?thank you so much Luca De Angelis

Asked 2 ´years ago | USA Lab Equipment 110V 2L Rotary Evaporator Rotovap RE-200A - 1 Year Warranty

Question 17

Yeah go ahead and send the box and label for the return at you cost not mine, you should make clear what you are putting up , it has usa labels doesn't say its from china, adress is from the east coast usa so it looks like a usa made products false xxxx

Asked 2 ´years ago | USA Lab Equipment 110V 2L Rotary Evaporator Rotovap RE-200A - 1 Year Warranty

Question 18

My glass came defective, so why won't you honor the replacement policy

Asked 2 ´years ago | USA Lab Equipment 110V 2L Rotary Evaporator Rotovap RE-200A - 1 Year Warranty

Question 19

As the model with the pump is currently out of stock, what pump would you recommend to use with this freeze dryer? Is it capable of pulling down 50 mTorr?

Asked 2 ´years ago | Freeze Dryers > USA Lab -35°C Scientific Freeze Dryer 1-2 Gallons Per Batch / 4L Ice Capacity / 3 Year Warranty

Question 20

Good Day Our customer is looking for a new Chiller and the USA Lab -30Â°C 30L Recirculating Chiller UC-30/30 30L/Min suits there application. Please can you forward us the data sheet of the unit running with ethanol as a fluid. Do you ship to South Africa or must we arrange the transport for the unit?RegardsIwan van den Berg

Asked 2 ´years ago | Chillers > USA Lab -30°C 30L Recirculating Chiller UC-30/30 42L/Min

Question 21

How low of a vacuum can this jacketed solvent tank handle?

Asked 2 ´years ago | USA Lab ASME 25L Jacketed Solvent Tank w/ Sight Glasses, Casters & 1.5" TC Drain 50LB Water (24LB Butane)

Question 22

Blaze Canna here. We're waiting on a replacement 50l vacuum filter ball. We've also broke the "BrandsUSA Lab Flow Control Glass Stopcock Adapters w/ 3/8 Barb" but unsure of the fitting size. If you could please relay that info to me or go ahead and put the order in for us. Please and thank you.

Asked 2 ´years ago | Glassware > USA Lab Flow Control Glass Stopcock Adapters w/ 3/8 Barb

Question 23

How do I determine the size I need? The adaptor piece I need should fit a 100L reactor.

Asked 2 ´years ago | Glassware > USA Lab Flow Control Glass Stopcock Adapters w/ 3/8 Barb

Question 24

What is the size of the all thread rod used to hold the fittings across the glass section?

Asked 2 ´years ago | Tri-Clamp Sanitary Short Sight Glass Stainless 304- Various Sizes - 1.5", 2", 3", 6", 12"

Question 25

Hello, I would like to know if the CS-50H are in stock at this moment?

Asked 2 ´years ago | New > HUBER CS Chillers

Question 26

Can I please get a quote on USA Lab Dual-Jacketed 100L 316L-Grade Stainless Steel Reactor Turnkey and USA Lab 100L Single Jacketed Glass Reactor and also their lead time.

Asked 2 ´years ago

Question 27

So before i spend TWICE the amount of money on a glass stopper, that i would pay on the flask???? i get dimension size....i think...im looking at a 34/45 to fit that 1000 ml flask....there is no # desigination on the product. I had to go to a different product to find stopper sizes. im not a chemist, im sorry. im buying this flask for my Chinese Tea obssesion. You know Gong Fu Cha. I just think an Erlenmeyer flask would be a cool addition to my Chinese Tea set and if i get great service, ill end up buying more....TY ..youve been helpful

Asked 2 ´years ago | USA Lab 1000ML Erlenmeyer Flask Borosilicate 3.3

Question 28

Could you please give the different sizes these reducers come in

Asked 2 ´years ago | Stainless Steel KF25 to 2" Tri-clamp Adapter

Question 29

We have one of your 12" stainless steel Buchner funnel filter. We had a problem with the filter support plate deforming and pushing out of the groove that holds it. The pressure differential across the filter was less than 25 psi. Do you have any idea why it failed? We have two rings with the ~1/4" round holes, but not the open cross that is shown in some of your photos.

Asked 2 ´years ago | Buchner Funnels > USA Lab Stainless Steel 6" in. Buchner Funnel SS 304

Question 30

I have some Dowtherm HD on hand from another system., is this propylene glycol safe to use with the RH-30L unit?

Asked 2 ´years ago | Heaters > USA Lab 200°C 50L Recirculating Heater RH-50L 18.3L/Min

Question 31

Do you have a stainless steel 1/2 inch plug with fine threads for my dinghy drain outlet?

Asked 2 ´years ago | Stainless Steel Threaded Plug

Question 32

Hello, I bought rotavap Re501, I did not reaize it does not come with chiller, vacuum pump and tubing, can you please advise what is missing and I can order to make it functional

Asked 2 ´years ago | USA Lab 5L Rotary Evaporator Turnkey Setup Rotovap RE-501

Question 33

Is your acetone US manufactured. 100%. I need it for a formulation I am working on for the BABA(Buy American Build American) Act.

Asked 2 ´years ago | USA Lab Acetone 99%

Question 34

Whath is the Temperature Accuracy?

Asked 2 ´years ago | Canatech Forced Convection Oven Incubator

Question 35

My question is! I need a 22000 ml (22 liter) heating mantle. The flasks we use have exit ports located at the base of the flask. The port is about 2â€ diameter. I have not found heating mantles with access ports. Can the heating mantles jacket be modified to accept a 2â€ port by separating the fabric at the base and if necessary drilling a hole in the housing if necessary?

Asked 2 ´years ago | USA Lab 22L Digital Heating Mantle W/ Heating Top - 300°C 3000RPM USA-HM-22L

Question 36

Hello; hope everyone there had a great Christmas. I am interested in purchasing this unit (Nella Utility/Laundry Sink). Have two questions:1. Was this a customer return? Assuming yesâ€¦..2. If purchasing this unit and all the accessories (prepaid), would I be able to make a pickup at your facility in mid-January 2023? I live in the Dayton, OH area, and have family in the Detroit area, and could arrange pickup on Friday, January 13th during business hours. Thank you for taking my questions!

Asked 2 ´years ago

Question 37

What is the clear diameter and the glass type and glass thickness of the HPSG - TC2 2" and TC3 3"? We have a 3/4" thick Al plate on the top end of our cylinder. How would we mount the sight glass to the plate? Do you have a mechanical drawing for each? thanks John

Asked 2 ´years ago | USA Lab High Pressure Triclamp Sight Glass 1.5", 2", 3" - 350PSI

Question 38

Can the 120 pound bitumen tank be used for propane?

Asked 2 ´years ago | 120LB N-Butane Tank

Question 39

Can you tell me if the steel portion of this sight glass is T316L Stainless?

Asked 2 ´years ago | USA Lab Fused Tri-Clamp Sight Glasses - 1.5", 2", 3"

Question 40

Why aren't' the MSDS's for items like this posted on the website?

Asked 2 ´years ago | USA Lab Methanol - Methyl Alcohol

Question 41

Just bought the JR5. Do you sell the corresponding cooling/heating circulator for the jacket glass? Need to be able to heat the coolant to 100 deg C.

Asked 2 ´years ago | USA Lab 5L Single Jacketed Glass Reactor (Optional ETL, Explosion Proof & Pneumatic Mixers)

Question 42

what is the weight capacity for each shelf in this unit

Asked 2 ´years ago

Question 43

USA Lab 20L Centrifuge Turnkey System - XTC-20-TK is this a good unit? What does this mean? *THIS IS NOT CERTIFIED AND CARRIES NO UL, NRTL, OR C1D1 RATING. PLEASE KEEP THIS IN MIND PRIOR TO PURCHASING****

Asked 2 ´years ago

Question 44

Do you have 10 bbl fermenters in stock?

Asked 2 ´years ago | USA Lab Stainless Steel Jacketed Conical Fermenter

Question 45

What is the price of the USA Lab Dual-Jacketed 100L 316L-Grade without the condenser and collections vessels? How many hp is the stirrer? Do you have 1 in stock ready to ship?

Asked 2 ´years ago | USA Lab Dual-Jacketed 100L 316L-Grade Stainless Steel Reactor

Question 46

How I used ?

Asked 2 ´years ago | USA Lab B-55 Supreme Filtration Media

Question 47

Hey, gimme six of 'em shipped for $25, and you've got a deal!

Asked 2 ´years ago | USA Lab 500ML Coffee Mug Beaker Borosilicate 3.3

Question 48

I am wanting to know the base diameter and length of the filter housing wall for the funnel on the following link for this item. Is this the 13.77"x8.66" dimensions given on the website? I need to order a acid filter cloth for filtering off liquids and these dimensions will allow me to but the right size cloth.

Asked 2 ´years ago | Buchner Funnels > USA Lab 5L Vacuum Filter

Question 49

What is the uniformity at 15-25C for the USA-RHC-7L model?

Asked 2 ´years ago

Question 50

What size is the condenser connection flange, is it 40/60? I see that the washer seal is a #60

Asked 2 ´years ago | 20L Receiving Flask for USA Lab 50L RE-1050 Rotary Evaporator

Browse by Topic

Tools