Gaskets Q&A

Question 1

Are these gaskets compatible with Tri-Clamp sanitary fittings? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 2

What type of clamps should be used with these gaskets? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 3

What is the warranty period for these gaskets? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 4

Are these gaskets USP Class VI compliant? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 5

Do these gaskets meet 3A sanitary standards? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 6

Are these gaskets FDA compliant? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 7

What is the connection type for these gaskets? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 8

What is the brittle point of these gaskets? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 9

What is the maximum continuous use (static) temperature for these gaskets? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 10

What is the minimum continuous use (static) temperature for these gaskets? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 11

What is the high temperature range for these gaskets? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 12

What is the low temperature range for these gaskets? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 13

What is the maximum temperature these gaskets can handle for continuous use? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 14

What is the minimum temperature these gaskets can handle for continuous use? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 15

What materials are used in the construction of the gasket? View answer

Asked 1 ´month ago | USA Lab PTFE Envelope Tri-Clamp Gaskets with Viton Filler - 1.5" to 12" - USA Made - FDA Compliant

Question 16

What is the tensile strength of the gasket? View answer

Asked 2 ´months ago | Gaskets > USA Made Buna-N Tri Clamp Gasket - FDA Compliant - 1.5" to 12"

Question 17

What is the temperature range for continuous use of the gasket? View answer

Asked 2 ´months ago | Gaskets > USA Made Buna-N Tri Clamp Gasket - FDA Compliant - 1.5" to 12"

Question 18

Does the gasket meet any standards? View answer

Asked 2 ´months ago | Gaskets > USA Made Buna-N Tri Clamp Gasket - FDA Compliant - 1.5" to 12"

Question 19

Is the gasket FDA compliant? View answer

Asked 2 ´months ago | Gaskets > USA Made Buna-N Tri Clamp Gasket - FDA Compliant - 1.5" to 12"

Question 20

What material is the gasket made of? View answer

Asked 2 ´months ago | Gaskets > USA Made Buna-N Tri Clamp Gasket - FDA Compliant - 1.5" to 12"

Question 21

What solvents and chemicals is this gasket compatible with? View answer

Asked 3 ´months ago | Gaskets > USA Made Buna-n Gasket w/ Mesh - FDA Compliant - 1.5" to 6" - 5 Micron - 300 Micron

Question 22

Is this gasket FDA compliant? View answer

Asked 3 ´months ago | Gaskets > USA Made Buna-n Gasket w/ Mesh - FDA Compliant - 1.5" to 6" - 5 Micron - 300 Micron

Question 23

What is the elongation range for this gasket? View answer

Asked 3 ´months ago | Gaskets > USA Made Buna-n Gasket w/ Mesh - FDA Compliant - 1.5" to 6" - 5 Micron - 300 Micron

Question 24

What is the tensile strength range of the gasket? View answer

Asked 3 ´months ago | Gaskets > USA Made Buna-n Gasket w/ Mesh - FDA Compliant - 1.5" to 6" - 5 Micron - 300 Micron

Question 25

What is the high-temperature range for this gasket? View answer

Asked 3 ´months ago | Gaskets > USA Made Buna-n Gasket w/ Mesh - FDA Compliant - 1.5" to 6" - 5 Micron - 300 Micron

Question 26

What is the low-temperature range for this gasket? View answer

Asked 3 ´months ago | Gaskets > USA Made Buna-n Gasket w/ Mesh - FDA Compliant - 1.5" to 6" - 5 Micron - 300 Micron

Question 27

What material is the gasket made of? View answer

Asked 3 ´months ago | Gaskets > USA Made Buna-n Gasket w/ Mesh - FDA Compliant - 1.5" to 6" - 5 Micron - 300 Micron

Question 28

Is Buna-N water resistant? View answer

Asked 3 ´months ago | Gaskets > USA Lab Buna-N Tri Clamp Gasket - 1.5" to 12"

Question 29

Does the gasket have good buna n resistance to butane and propane? View answer

Asked 3 ´months ago | Gaskets > USA Lab Buna-N Tri Clamp Gasket - 1.5" to 12"

Question 30

What are the temperature ratings for the Buna gasket? View answer

Asked 3 ´months ago | Gaskets > USA Lab Buna-N Tri Clamp Gasket - 1.5" to 12"

Question 31

Before purchasing, which systems are buna gaskets best suited for? View answer

Asked 3 ´months ago | Gaskets > USA Lab Buna-N Tri Clamp Gasket - 1.5" to 12"

Question 32

What is a tri-clamp gasket? View answer

Asked 3 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 33

What major benefit does a PTFE gasket have? View answer

Asked 3 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 34

How do the gaskets perform with acids, dilute? View answer

Asked 3 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 35

Are the gaskets compliant with USP Class VI standards? View answer

Asked 4 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 36

What is the minimum temperature the gaskets can withstand? View answer

Asked 4 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 37

What is the maximum continuous temperature for the gaskets? View answer

Asked 4 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 38

What is the maximum temperature the gaskets can withstand? View answer

Asked 4 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 39

Are the gaskets FDA compliant? View answer

Asked 4 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 40

What is the temperature range for the gaskets? View answer

Asked 4 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 41

What material is used for the gaskets? View answer

Asked 4 ´months ago | USA Lab PTFE Tri-Clamp Gaskets- 1.5" to 12" - USA Made - FDA Compliant - 1.5" to 12"

Question 42

Does the Buna-N Tri-Camp Gaskets' min temp affect 150 mesh to micron? View answer

Asked 4 ´months ago | Gaskets > Buna-n Gasket with 150 Mesh (100 Micron) - Various Sizes

Question 43

What is a mesh gasket? View answer

Asked 4 ´months ago | Gaskets > Buna-n Gasket with 150 Mesh (100 Micron) - Various Sizes

Question 44

What is the actual outer diameter on the 4" size? View answer

Answer updated 4 months ago | Gaskets > Buna-n Gasket with 150 Mesh (100 Micron) - Various Sizes

Question 45

What type of alloy is the mesh made of? View answer

Answer updated 4 months ago | Gaskets > Buna-n Gasket with 150 Mesh (100 Micron) - Various Sizes

Question 46

Can these gaskets be reused? View answer

Answer posted 5 months ago | Gaskets

Question 47

Do I need special clamps for mesh gaskets? View answer

Answer posted 5 months ago | Gaskets

Question 48

What's the difference between Buna-N and PTFE gaskets? View answer

Answer posted 5 months ago | Gaskets

Question 49

Which side of the Buna-n Gasket with 550 Mesh (25 Micron) goes in the direction of flow View answer

Answer posted 6 months ago | Gaskets > Buna-n Gasket with 550 Mesh (25 Micron) - Various Sizes

Question 50

What is the ID and OD of the rubber portion? - for all sizes of "Buna-n Gasket with 300 Mesh & (50 Micron)" View answer

Answer posted 1 year ago | Gaskets > Buna-n Gasket with 300 Mesh & (50 Micron) - Various Sizes

Gaskets Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools