Question 1

Can the Laboratory Watch Glass be cleaned and reused? View answer

Asked 2 ´years ago | USA Lab Watch Glass

Question 2

Is the Laboratory Watch Glass compatible with other laboratory apparatus? View answer

Asked 2 ´years ago | USA Lab Watch Glass

Question 3

What should I do if my Laboratory Watch Glass arrives broken? View answer

Asked 2 ´years ago | USA Lab Watch Glass

Question 4

Around what's the max temp this can handle if heat is directly on it? View answer

Asked 2 ´years ago | USA Lab 5000ML Erlenmeyer Flask 24/40 Borosilicate 3.3

Question 5

do they make this in S.S. or Glass 24/40 ? View answer

Asked 2 ´years ago | USA Lab KF25 to PTFE Adapter

Question 6

Will this chiller work with heat transfer mineral oil and/or glycol? View answer

Asked 2 ´years ago | USA Lab -80°C 100L Closed Loop Recirculating Chiller CLC-100/80 235L/Min - USED

Question 7

do you have organic ethanol View answer

Asked 2 ´years ago | USA Lab 190 Proof Ethanol USP 95% - Excise Tax Included

Question 8

For USAJICHOSE14, are there 1/4" female connection on both ends? View answer

Asked 2 ´years ago | Hosing > USA Made 1/4" 37° JIC Stainless Steel Hose

Question 9

what um micron is the filter flint. or coarse med fine View answer

Asked 2 ´years ago | USA Lab Glass Vacuum Filtration Kit w/ 40/38 Glass Joint Connection

Question 10

What is the maximum downforce weight that can be had due to heavy solutions in the evaporation flask?

Asked 2 ´years ago | USA Lab 50L Dual Set-up Explosion Proof Rotary Evaporator -180°C - 220-240V

Question 11

Are these vessels vacuum rated as well or only internal pressure? View answer

Asked 2 ´years ago | USA Lab ASME Jacketed Solvent Tank w/ Compression - 100LB, 200LB, 400LB & 600LB (48LB, 96LB, 192LB & 300LB Butane)

Question 12

Hello, I was wondering what the length is for UPC# 810047125648?

Asked 2 ´years ago | 1/2" Male Elbow NPT 45 Degrees

Question 13

Is the hose diameter of the 1.5 inch tri clamp the same hose diameter with the 2 in tri clamp? View answer

Asked 2 ´years ago | USA Lab 1.5 Tri Clamp Stainless Braided Hose w/ PTFE Lining

Question 14

What is the psi rating on this?? View answer

Asked 2 ´years ago | Jacketed Material Column w/ Compression- 6" Tri-Clamp w/ (2) 1/2" Compression- 6" x 24", 6" x 48"

Question 15

Hello, can you tell me if this tank is 304, 316, or 316L stainless steel? View answer

Asked 2 ´years ago | USA Lab ASME 25L Jacketed Solvent Tank w/ Sight Glasses, Casters & 1.5" TC Drain 50LB Water (24LB Butane)

Question 16

Where can I find the SDS, why isn’t it on this page? View answer

Asked 7 ´days ago | USA Lab High Purity CDA 12-A - 200 Proof Denatured Ethanol With N-Heptane

Question 17

Is the probe stainless steel? Is there an option for PTFE coated? View answer

Asked 2 ´years ago | USA Lab USA-TM Premium Digital K-type Thermometer w/ Probe

Question 18

This machine can be used for biofertilizer production? View answer

Asked 2 ´years ago | USA Lab Stainless Steel Jacketed Conical Fermenter

Question 19

Pressure Rating View answer

Asked 2 ´years ago | USA Lab 6" Jacketed Collection Base - 1/2" FNPT

Question 20

Does this lid come with a 12" tri-clamp? View answer

Asked 2 ´years ago | 12" Hemispherical Lid 2x 2" Tri-Clamp 1x 3" Tri-Clamp 2x 1/4" FNPT 2x 1/2" FNPT

Question 21

How long is the valve from port to port. I assume the 11" is for the port to the handle when fully opened. View answer

Asked 2 ´years ago | 2" Tri-Clamp Ball Valve Sanitary Stainless 304 - 1000PSI

Question 22

What is the lead time on this item? View answer

Asked 2 ´years ago | USA Lab 500L Stainless Steel Jacketed Storage Vessel -JSV500L

Question 23

I have only 110V socket. If I use a transformer, Will it work ? View answer

Asked 2 ´years ago | Chillers > USA Lab -30°C 50L Recirculating Chiller UC-50/30 42L/Min

Question 24

What is the overall height on this reducer? Is there a part drawing? View answer

Asked 2 ´years ago | Hemispherical Reducer - Tri Clamp 6" to 4" - SS304

Question 25

Pressure Rating View answer

Asked 2 ´years ago | Jacketed Material Column Spool - 12" x 12" Tri Clamp w/ (2) 1/2" FNPT - SS304

Question 26

G'day,Our firm Jamaica Red Moon Limited is interested in acquiring a USA-UC-30L (Ultrasonic Cleaner). Jamaica operates on 50Hz. Is this unit readily available in 50Hz? If not, could one be modified from 60Hz to 50Hz? How long would that take and would there be any variation in the purchase price? View answer

Asked 3 ´years ago

Question 27

is it easy to hook up View answer

Asked 3 ´years ago | USA Lab -10°C 5L Recirculating Chiller UC-510-5/10 42L/Min 110V

Question 28

Does the USA Lab 5L Rotary Evaporator Turnkey Rotovap RE-501 w/ Vacuubrand MZ 2C NT comes with everything in the picture for the listed price? Thank you, View answer

Asked 3 ´years ago | USA Lab 5L Rotary Evaporator Turnkey Rotovap RE-501 w/ Vacuubrand MZ 2C NT

Question 29

Is there a timeline when this will be back in stock? View answer

Asked 3 ´years ago

Question 30

can this be used with ozonization systems for water treatment? View answer

Asked 3 ´years ago | Gaskets > Buna-n Gasket with 550 Mesh (25 Micron) - Various Sizes

Question 31

What is the procedure for removing the retaining ring and replacing the mesh? View answer

Asked 3 ´years ago | Filter Plate Kit - Tri Clamp 6" With 100 Micron Mesh & Filter Ring - SS304

Question 32

SPOOL6X12, IS THIS ITEM IN STOCK? View answer

Asked 3 ´years ago | 6" Tri Clamp Spools - various sizes

Question 33

What size is the condenser connection flange, is it 40/60? I see that the washer seal is a #60

Asked 3 ´years ago | 20L Receiving Flask for USA Lab 50L RE-1050 Rotary Evaporator

Question 34

What is the uniformity at 15-25C for the USA-RHC-7L model?

Asked 3 ´years ago

Question 35

How I used ?

Asked 2 ´years ago | USA Lab B-55 Supreme Filtration Media

Question 36

Hey, gimme six of 'em shipped for $25, and you've got a deal!

Asked 2 ´years ago | USA Lab 500ML Coffee Mug Beaker Borosilicate 3.3

Question 37

What is the price of the USA Lab Dual-Jacketed 100L 316L-Grade without the condenser and collections vessels? How many hp is the stirrer? Do you have 1 in stock ready to ship?

Asked 3 ´years ago | USA Lab Dual-Jacketed 100L 316L-Grade Stainless Steel Reactor

Question 38

Do you have 10 bbl fermenters in stock?

Asked 2 ´years ago | USA Lab Stainless Steel Jacketed Conical Fermenter

Question 39

USA Lab 20L Centrifuge Turnkey System - XTC-20-TK is this a good unit? What does this mean? *THIS IS NOT CERTIFIED AND CARRIES NO UL, NRTL, OR C1D1 RATING. PLEASE KEEP THIS IN MIND PRIOR TO PURCHASING****

Asked 3 ´years ago

Question 40

what is the weight capacity for each shelf in this unit

Asked 3 ´years ago

Question 41

Just bought the JR5. Do you sell the corresponding cooling/heating circulator for the jacket glass? Need to be able to heat the coolant to 100 deg C.

Asked 3 ´years ago | USA Lab 5L Single Jacketed Glass Reactor (Optional ETL, Explosion Proof & Pneumatic Mixers)

Question 42

Why aren't' the MSDS's for items like this posted on the website?

Asked 3 ´years ago | USA Lab Methanol - Methyl Alcohol

Question 43

Can you tell me if the steel portion of this sight glass is T316L Stainless?

Asked 3 ´years ago | USA Lab Fused Tri-Clamp Sight Glasses - 1.5", 2", 3"

Question 44

Can the 120 pound bitumen tank be used for propane?

Asked 3 ´years ago | 120LB N-Butane Tank

Question 45

What is the clear diameter and the glass type and glass thickness of the HPSG - TC2 2" and TC3 3"? We have a 3/4" thick Al plate on the top end of our cylinder. How would we mount the sight glass to the plate? Do you have a mechanical drawing for each? thanks John

Asked 3 ´years ago | USA Lab High Pressure Triclamp Sight Glass 1.5", 2", 3" - 350PSI

Question 46

Hello; hope everyone there had a great Christmas. I am interested in purchasing this unit (Nella Utility/Laundry Sink). Have two questions:1. Was this a customer return? Assuming yesâ€¦..2. If purchasing this unit and all the accessories (prepaid), would I be able to make a pickup at your facility in mid-January 2023? I live in the Dayton, OH area, and have family in the Detroit area, and could arrange pickup on Friday, January 13th during business hours. Thank you for taking my questions!

Asked 3 ´years ago

Question 47

My question is! I need a 22000 ml (22 liter) heating mantle. The flasks we use have exit ports located at the base of the flask. The port is about 2â€ diameter. I have not found heating mantles with access ports. Can the heating mantles jacket be modified to accept a 2â€ port by separating the fabric at the base and if necessary drilling a hole in the housing if necessary?

Asked 3 ´years ago | USA Lab 22L Digital Heating Mantle W/ Heating Top - 300°C 3000RPM USA-HM-22L

Question 48

Whath is the Temperature Accuracy?

Asked 3 ´years ago | Canatech Forced Convection Oven Incubator

Question 49

Is your acetone US manufactured. 100%. I need it for a formulation I am working on for the BABA(Buy American Build American) Act.

Asked 2 ´years ago | USA Lab Acetone 99%

Question 50

Do you have a stainless steel 1/2 inch plug with fine threads for my dinghy drain outlet?

Asked 3 ´years ago | Stainless Steel Threaded Plug

Browse by Topic

Tools