Question 1

What size tanks work with these mechanical stirrers? View answer

Asked 2 ´months ago | Mechanical Stirrers

Question 2

Do I need a lift stand for benchtop mechanical stirrer models? View answer

Asked 2 ´months ago | Mechanical Stirrers

Question 3

What's the connection size for the collection side? Do you have bigger collection flasks available? View answer

Asked 3 ´years ago | USA Lab Cold Trap Dry Ice Condenser Kit - 1L & 5L

Question 4

What is the temperature rating at 25 psig internal pressure? Thanks! View answer

Asked 3 ´years ago

Question 5

What size short path distillation kit do I need? View answer

Asked 2 ´months ago | Short Path Distillation

Question 6

Do mixing tanks from USA Lab come ready to use? View answer

Asked 2 ´months ago | Mixing Tanks

Question 7

is it possible I can purchase just the water bath tub? View answer

Asked 3 ´years ago | New 110V 5L Rotary Evaporator Rotovap RE-501 - 180°C - 1 Year Warranty

Question 8

Are the glass reactors safe for solvents? View answer

Asked 2 ´months ago | Reactors

Question 9

What pressure can these reactors handle? View answer

Asked 2 ´months ago | Reactors

Question 10

What is the output pressure of the circulation pump? View answer

Asked 3 ´years ago | USA Lab 110V 5L -10°C to 99°C Magnetic Recirculating Heater Chiller HC-5/10

Question 11

Can I use wiped film distillation for cannabinoids? View answer

Asked 2 ´months ago | Wiped Film Distillation

Question 12

How do I scale up my wiped film distillation setup? View answer

Asked 2 ´months ago | Wiped Film Distillation

Question 13

What is the volume capacity? Can it hold 250mL of fluid? What is the outer diameter of the stem opening? View answer

Asked 3 ´years ago | USA Lab 150mm Glass Funnel

Question 14

Does the Tri Clamp 12" come with the nut and bolts? What is the size and thread type for the bolt the 12" Clamp uses? View answer

Asked 3 ´years ago | Clamps > High Pressure Tri Clamp

Question 15

Are pumps required with falling film evaporators? View answer

Asked 2 ´months ago | Falling Film Evaporators

Question 16

What's the difference between single-sided and dual-sided falling film evaporator systems? View answer

Asked 2 ´months ago | Falling Film Evaporators

Question 17

Is the PTFE core convoluted or smooth bore? View answer

Asked 2 ´months ago | Hosing > USA Lab 3/8" 37° JIC Stainless Steel Hose 12", 24", 36", 48", 60", 72", 96", 144"

Question 18

Do you have other sizes? Can you put solvents in them like alcohols and mineral spirits? View answer

Asked 3 ´years ago | USA Lab 1L Wash Bottle - Various Colors

Question 19

WHERE IS IT MADE? WHEN CAN YOU SHIP TO EATONTOWN. NJ WHAT IS THE WARRANTY? View answer

Asked 3 ´years ago

Question 20

What psi are the spools rated for? View answer

Asked 3 ´years ago | Jacketed Material Column Spool - 6" Tri-Clamp w/ (2) 1/2" FNPT - 6" x 12", 6" x 24", 6" x 36"

Question 21

Which side of the Buna-n Gasket with 550 Mesh (25 Micron) goes in the direction of flow View answer

Asked 2 ´months ago | Gaskets > Buna-n Gasket with 550 Mesh (25 Micron) - Various Sizes

Question 22

What is the minimum mixing volume on the 10L and 20L ractors?

Asked 2 ´months ago | USA Lab 20L Single Jacketed Glass Reactor (Optional ETL, Explosion Proof & Pneumatic Mixers)

Question 23

What material is the cap made of? View answer

Asked 1 ´month ago | USA Lab GL80 Wide Mouth Media Storage Bottle - 1L, 2L & 5L

Question 24

What is the overall length? View answer

Asked 3 ´years ago | 1.5" Tri-Clamp End Cap with FNPT - Various Sizes - 1/4",3/8",3/4", 1"

Question 25

Hello, what is the availability of this vacuum oven? Once ordered, how long before shipping? Oven is USA-VO-32 (no pump just oven). Thank you John Roth, Precision Fluid Controls View answer

Asked 3 ´years ago | USA Lab 3.2 CuFt Vacuum Drying Oven w/ 6 Shelves (12 Slots) 150°C 110V 5 Sided Heating

Question 26

I'm looking at your in-line compression sight glass. Do you offer any similar to this rated for pressures of 300PSI? View answer

Asked 3 ´years ago | Sight Glasses > USA Lab Inline Compression Sight Glass

Question 27

When will 24/40 thermal wells 12L & 22L be back in stock? View answer

Asked 3 ´years ago | USA Made Thermowells - 2L, 5L, 12L & 22L - 24/40 & 45/50

Question 28

Is there any shipping? If so, what's the cost? What is the minimum age to buy dry ice? View answer

Asked 3 ´years ago | DRY ICE - Pellets or Rice

Question 29

Hi there, Just wondering on the ETA / lead time for these to Australia? View answer

Asked 3 ´years ago | FYRA Wide Range Vacuum Controller | Capacitive Piezo Sensor + SS DINAMO Valve, Proportional Bleed & Throttle Control, 0.01 to 1000 Torr, Gas Independent

Question 30

What is the weight of 50L-JSSR? View answer

Asked 3 ´years ago

Question 31

What is the pressure rating and at what temperature for the vessel? View answer

Asked 3 ´years ago | Jacketed Material Column Spool - 12" x 24" Tri Clamp w/ (2) 1/2" FNPT - SS304

Question 32

What is the thickness? View answer

Asked 3 ´years ago | Gaskets > USA Lab Buna-N Tri Clamp Gasket - 1.5" to 12"

Question 33

I'm looking for a recieving flask 2000 ml for a buchi r205 will this work if not do you have something that will View answer

Asked 3 ´years ago | 2000mL Spherical Joint Round Bottom Receiving Flask - 1 neck 35/20

Question 34

Why is this 5 gallon option in a bucket? Other vendors use a 5 gallon jug with a pour spout. View answer

Asked 3 ´years ago | USA Lab 190 Proof Ethanol USP 95% - Excise Tax Included

Question 35

Do you know what is the maximal viscosity (in cps) that the mixer can mix ? Thank you View answer

Asked 3 ´years ago | USA Lab 3" Tri-Clamp Variable Speed Electric Mount Mixer - Mixing Motor - 1000RPM - 90PSI

Question 36

Hey, gimme six of 'em shipped for $25, and you've got a deal!

Asked 2 ´years ago | USA Lab 500ML Coffee Mug Beaker Borosilicate 3.3

Question 37

What can I sterilize in the 150L autoclave? View answer

Asked 4 ´months ago | Mycology

Question 38

How do diaphragm and piston pumps differ? View answer

Asked 4 ´months ago | Recovery Pumps

Question 39

What is the procedure for removing the retaining ring and replacing the mesh? View answer

Asked 4 ´years ago | Filter Plate Kit - Tri Clamp 6" With 100 Micron Mesh & Filter Ring - SS304

Question 40

How hot can I heat this to? View answer

Asked 4 ´years ago | USA Lab 5000ML Erlenmeyer Flask Borosilicate 3.3

Question 41

What is the ETA for tge 100 liter glass jacketed reactor lab with condensor View answer

Asked 4 ´years ago | USA Lab 100L Single Jacketed Glass Reactor (Optional ETL, Explosion Proof & Pneumatic Mixers)

Question 42

What is the average response time to go from 180F heating to 30F chilling for the HC 5/10? View answer

Asked 4 ´years ago | USA Lab 110V 5L -10°C to 99°C Magnetic Recirculating Heater Chiller HC-5/10

Question 43

What is the outer diameter at the widest point?

Asked 4 ´months ago | USA Lab 500ML Erlenmeyer Flask Borosilicate 3.3

Question 44

Hello,What is the lead time on a USA Lab 2L Rotary Evaporator Turnkey Rotovap RE-200A w/ Vacuubrand MZ 2C NT? Thanks,Andrew View answer

Asked 4 ´years ago | USA Lab 2L Rotary Evaporator Turnkey Rotovap RE-200A w/ Vacuubrand MZ 2C NT

Question 45

Could this product come without legs so the that tank can be rolled on rolllers? View answer

Asked 4 ´years ago

Question 46

From the photo, the leg brackets are welded to the vessel, but the legs attach to the brackets with bolts, so it seems apparent that they are removable. View answer

Asked 4 ´years ago

Question 47

Hello! What is the tube diameter for this part? View answer

Asked 4 ´years ago | Coils > Stainless Steel 10" Condensing Coil Bucket- SS304- Various sizes- 1/2" , 1/4"

Question 48

How tall is this flask?

Asked 3 ´months ago | USA Lab 2000ML Erlenmeyer Flask 24/40 Borosilicate 3.3

Question 49

Can the coffee mug go in the microwave View answer

Asked 3 ´months ago | USA Lab 500ML Coffee Mug Beaker Borosilicate 3.3

Question 50

what is the 2000 ml flask made of? Mg silicate? Li silicate? other? View answer

Asked 3 ´months ago | USA Made Glassware

Browse by Topic

Tools